Titanium and titanium alloy standards
1、 Chinese standards
1. Chinese national standards
GB / t2524-2007 titanium sponge
GB / t3620-2007 titanium and titanium alloy grades and chemical compositions
GB / t15073-1994 grades and chemical compositions of cast titanium and titanium alloys
GB / t3621-2007 titanium and titanium alloy sheet
GB/T14845-1993 Titanium plate for plate heat exchanger
GB / t3622-1999 titanium and titanium alloy strip and foil
GB / t3623-2007 titanium and titanium alloy wire
GB / t3624-2007 titanium and titanium alloy pipes
GB / t3625-2007 titanium and titanium alloy tubes for heat exchanger and condenser
GB / t2965-2007 titanium and titanium alloy bars
GB/T16598-1996 Titanium and titanium alloy cakes and rings
GB/T8546-1987 Titanium stainless steel clad plate
GB/T8547-1987 Titanium steel composite plate
GB/T6614-1994 Titanium and titanium alloy castings
GB / t5168-1985 test method for macrostructure of two phase titanium alloy
GB / t6611-2008 terminology of titanium and titanium alloys
GB / t8755-2008 metallographic Atlas of terms for titanium and titanium alloys
T12769-2003 titanium composite rod
GB / t13810-2007 titanium and titanium alloy processing materials for surgical implants
GB / t12417-1990 general specification for surgical metal implants
GB/T4698.1-4698.25-1996 Methods for chemical analysis of sponge titanium, titanium and titanium alloys
GB / t5193-2007 ultrasonic testing method for titanium and titanium alloy processed products
GB/T12969.1-1991 Ultrasonic testing method for titanium and titanium alloy pipes
GB/T13149-1991 Eddy current testing method for titanium and titanium alloy tubes
GB / t13149-1991 titanium and titanium alloy meet the welding technical requirements of steel plate
Sintered titanium filter elements and materials
GB / t8180-2007 packaging, marking, transportation and storage of titanium and titanium alloy processed products
TA7 titanium alloy plates for important applications
TC4 titanium alloy plates for important applications (GB / t6613-1986)
Welding specification for TA5 titanium alloy (GB / t1216-1992)
2. Chinese national military standards
Gjb2218-1994 specification for titanium and titanium alloy bars and forgings for aviation
Specification for titanium and titanium alloy bars (wires) for fasteners (gjb2219-1994)
Gjb2220-1994 specification for titanium alloy cake and ring blank for Aeroengine
Gjb2505-1995 specification for titanium and titanium alloy plate and strip for aviation
Gjb2744-1996 specification for titanium and titanium alloy bars, free forging and die forgings for aviation
Gjb2896-1996 specification for titanium and titanium alloy investment castings
Specification for TC4 titanium alloy sheet for superplastic forming (gjb2921-1997)
Gjb3763a-2004 heat treatment of titanium and titanium alloys
Gjb391-1987 TC4 titanium alloy for aerospace industry
Gjb493-1988 TC4 titanium alloy bars for Aeroengine Blades
Gjb494-1988 TC11 titanium alloy bars for Aeroengine Blades
Gjb495-1988 ta7-d titanium alloy bar for ultra low temperature
Ta5-a titanium alloy forgings for submarine gjb943-1900
Gjb944-1900 ta5-a titanium alloy plate
Gjb1169-1991 specification for titanium alloy rings for aerospace applications
Technical specification for tjb1205-1991 tb2-1 titanium alloy rivets
Specification for TC4 titanium alloy bars for aircraft structures (gjb1538-1992)
2、 American Standard
1. ASTM standards
Astmb229-2001 titanium sponge
Astmb265-2005 titanium and titanium alloy strip, sheet and plate
ASTM b337-1995 titanium and titanium alloy seamless pipe and welded pipe (has been replaced by b861-2002 titanium and titanium alloy seamless pipe, b862-2002 titanium and titanium alloy welded pipe)
ASTM b338-2005a seamless and welded tubes for titanium and titanium alloy condensers and heat exchangers
ASTM b348-2005 titanium and titanium alloy bars and billets
ASTM b363-2004 non alloy titanium and titanium alloy seamless and welded pipe fittings
ASTM b367-2004 titanium and titanium alloy castings
ASTM b861-2002 titanium and titanium alloy seamless pipe
ASTM b862-2002 titanium and titanium alloy welded pipe
ASTM b381-2005 titanium and titanium alloy forgings
ASTM f67-2000 pure titanium for surgical implants
ASTM f136-2002a Ti-6Al-4V Eli processed materials for surgical implants
ASTM f620-2002 α + β phase titanium alloy forgings for surgical implants
Astmf1108-2002 Ti-6Al-4V castings for surgical implants
Astmf1295-2001 Ti-6Al-7Nb processed materials for surgical implants
Astmf1341-1999 pure titanium wire
ASTM f1472-2002a Ti-6Al-4V processed materials for surgical implants
Astmf1713-1996 ti-13nb-13zr processed materials for surgical implants
Astmf1813-2001 ti-12mo-6zr-2fe processing material for surgical implants
ASTM f2063-2000 shape memory alloy processing materials for medical devices and surgical implants
2. American Society of Mechanical Engineers standards
ASME Section VIII: Section I pressure vessels (basic rules)
American aerospace materials technical standard
AMS 4900-2001 titanium sheet, strip and plate (annealed) (380MPa)
Ams4901-2002 titanium sheet, strip and plate (annealed) (485mpa)
Ams4902-2001 titanium sheet, strip and plate (annealed) (275mpa)
Ams4907-2001 ultra low gap element grade Ti-6Al-4V alloy sheet, strip and plate (annealed state)
Ams4910-2003 ti-5al-2.5sn alloy sheet, strip and plate (annealed state)
Ams4911-2003 Ti-6Al-4V sheet, strip and plate (annealed condition)
AMS4921-2004 Titanium bars, forgings and rings (annealed) (485mpa)
Ams4924-2002 ultra low gap element grade ti-5al-2.5sn alloy bars, forgings and rings (annealed condition)
Ams4926-2001 ti-5al-2.5sn rods and rings (annealed) (760mpa)
Ams4928-2001 Ti-6Al-4V alloy bars, forgings and rings (annealed) (825mpa)
Ams4941-2003 titanium welded pipe
Ams4942-2001 seamless titanium tube (annealed) (275mpa)
Ams4930-2001 ultra low gap element grade Ti-6Al-4V alloy bars, forgings and rings (annealed condition)
Ams4951-2003 industrial pure titanium welding wire
Ams4954-2003 Ti-6Al-4V alloy welding wire
Ams4965-2002 Ti-6Al-4V alloy bars, forgings and rings (solution and stabilization treatment)
Ams4966-2003 ti-5al-2.5sn forgings
Ams4967-2001 heat treatable Ti-6Al-4V alloy bars, forgings and rings (annealed condition)
Asm4972-2003 ti-8al-1mo-1v alloy bars and rings (solution and stabilization treatment)
Asm4973-2002 ti-8al-1mo-1v titanium alloy forgings (solution and stabilization treatment)
Asm4975-2003 ti-6al-2sn-4zr-2mo alloy bars and rings (solution and stabilization treatment)
Asm4983-2002 ti-10v-2f-3al forging (solution treatment and aging)
Asm4985-2003 Ti-6Al-4V alloy forgings cast by paraffin or graphite tamping method
Asm4991-2002 Ti-6Al-4V alloy precision forging (annealed state)
Approval and control of asm2380-2003 high quality titanium alloy
3. US military standards
Mil-t-9046-1999 titanium and titanium alloy sheet, strip and plate
Mil-t-9047-2005 titanium and titanium alloy bars and forgings
Mil-r-81588-1986 titanium and titanium alloy rods and wires
Mil-f-83142-2000 titanium and titanium alloy forgings (high quality)
Mil-t-46077 titanium alloy weldable armor plate
Mil-t-13405 titanium powder
Mil-t-46035-1989 high strength titanium alloy and deformation material
Mil-t-81556-1996 round bars, bars and extrusions of titanium and titanium alloys
Heat treatment of mil-t-81200 titanium and titanium alloy
3、 British Standard
Bs2ta1: 1974 sheet and strip of industrial pure titanium (tensile strength 290-420mpa)
Bs2ta2: 1973 industrial pure titanium sheet and strip (tensile strength 390-540mpa)
BS 2ta3:1973 industrial pure titanium bars and profiles for machining (tensile strength 390-540mpa)
BS 2ta4:1973 forging stock of industrial pure titanium (tensile strength 390-540mpa)
BS 2ta5:1973 forging stock of industrial pure titanium (tensile strength 390-540mpa)
Bs2ta6: 1973 industrial pure titanium sheet and strip (tensile strength 570-730mpa)
Bs2ta7: 1973 industrial pure titanium bars and profiles for machining (tensile strength 540-740mpa)
Bs2ta8: 1973 forged blanks of industrial pure titanium (tensile strength 540-740mpa)
Bs2ta9:1973 industrial pure titanium forgings (tensile strength 540-740mpa)
Bs2ta10:1974 titanium aluminum vanadium alloy sheet and strip (tensile strength 960-1270mpa)
Bs2ta11:1974 titanium aluminum vanadium alloy bars and sections for machining (tensile strength 900-1160mpa)
BS 2ta12:1974 Ti Al V alloy forging stock (tensile strength 900-1160mpa)
Bs2ta13:1974 titanium aluminum vanadium alloy forgings (tensile strength 900-1160mpa)
Bs2ta21:1973 titanium copper alloy sheet and strip (tensile strength 540-770mpa)
BS 2ta22:1973 titanium copper alloy bars and sections for machining (tensile strength 540-770mpa)
BS 2ta23:1973 titanium copper alloy forging stock (tensile strength 540-770mpa)
Bs2ta24:1973 titanium copper alloy forgings (tensile strength 540-770mpa)
BS 2ta28:1974 Ti Al V alloy forging stock and wire (tensile strength 1100-1300mpa)
Bsta38:1993 titanium aluminum molybdenum tin silicon carbon alloy bars for machining (tensile strength 1250-1420mpa)
Bsta39:1993 forging stock of Ti Al Mo Sn Si C alloy (tensile strength 1250-1420mpa)
Bsta40:1993 titanium aluminum molybdenum tin silicon carbon alloy bars for machining (tensile strength 1250-1375mpa)
Bsta41:1993 forging stock of Ti Al Mo Sn Si C alloy (tensile strength 1250-1375mpa)
Bsta42:1993 titanium aluminum molybdenum tin silicon carbon alloy forgings (tensile strength 1250-1375mpa)
Bsta45:1993 titanium aluminum molybdenum tin silicon alloy bars and sections for machining (tensile strength 1100-1280mpa)
Bsta46:1993 titanium aluminum molybdenum tin silicon alloy bars and sections for machining (tensile strength 1050-1220mpa)
Bsta47:1993 forging stock of Ti Al Mo Sn Si alloy (tensile strength 1050-1220mpa)
Bsta48:1993 forging stock of Ti Al Mo Sn Si alloy (tensile strength 1050-1220mpa)
Bsta49:1993 titanium aluminum molybdenum tin silicon alloy bars and sections for machining (tensile strength 1000-1200mpa)
Bsta50:1993 forging stock of Ti Al Mo Sn Si alloy (tensile strength 1000-1200mpa)
Bsta51:1993 titanium aluminum molybdenum tin silicon alloy forgings (tensile strength 1000-1200mpa)
Bsta52:1993 titanium copper alloy sheet and strip (tensile strength 690-920mpa)
Bsta66:1993 thick plate of Ti Al V alloy (tensile strength 895-1150mpa)
Bsta57:1993 titanium aluminum molybdenum tin silicon thick plate (tensile strength 1030-1220mpa)
Bsta58:1993 thick plate of titanium copper alloy (tensile strength 520-640mpa)
Inspection and experimental methods of bsta100:1973 deformed titanium and titanium alloys
Bs5500:1997 flameless fusion welding pressure vessel
Lining and chemical equipment of cp3003 pressure vessel
4、 Russian standard
Γ oct17746-79 titanium sponge
Γ oct19807-91 wrought titanium and titanium alloy grades
Γ oct22178-90 titanium and titanium alloy sheet
Γ oct23755-87 titanium and titanium alloy thick plate
Γ oct21945-82 hot rolled seamless titanium tube
Γ oct22897-86 cold rolled seamless titanium tube
Γ oct24890-81 welded titanium pipe
Γ oct26492-85 titanium and titanium alloy rolling bar
Specification of Γ oct27265-87 titanium and titanium alloy filler wire
5、 Japanese standard
Jish2151-1983 sponge
Jish4600-1993 titanium and titanium alloy plate and strip
Jish4630-1994 titanium and titanium alloy seamless pipe
Jish4631-1994 titanium and titanium alloy heat exchanger tubes
Welding of titanium alloy ji4635
Jish4650-2000 titanium and titanium alloy rod
Jish4657-1998 titanium and titanium alloy forgings
Jish4670-1993 titanium and titanium alloy wire
Jis7505 titanium casting
6、 German standard
Chemical composition of din17850-1990 industrial pure titanium for pressure working
Chemical composition of din17851-1990 titanium alloy pressure working materials
Din17860-1990 titanium and titanium alloy plate and strip
Din17861-1990 titanium and titanium alloy seamless pipe
Din17862-1990 titanium and titanium alloy bars
Din17863-1973 titanium and titanium alloy wire
Din17864-1993 titanium and titanium alloy forgings
Din17865-1990 cast titanium
Din17866-1990 titanium and titanium alloy welded pipe
Chemical composition and technical conditions of titanium and titanium palladium alloy filling materials
Din1737t2-1988 titanium and titanium palladium alloy filler materials -- test block, specimen, mechanical and technological properties
DIN931 external hexagon bolt half thread
DIN933 external hexagon bolt full thread
DIN931 outer hexagon nut
DIN127 spring washer
7、 French Standard
Nfl21-1101975 pure titanium T40 forging bar blank
Nfl21-2701981 TA6V rivet wire rod
Nfl16014 for forging
Nfl14-6021984 TA6V forgings
Nfl14-6031984 TA6V bar blank for forging
Nfl14-6041984 TA6V forging
Nfl14-6111984 ta6vzr5d bar blank
Nfl14-6121984 ta6vzr5d forging
8、 ISO international standard (titanium standard for surgical implants)
Iso5832-2-1999 pure titanium
ISO 5832-3-1996 Ti-6Al-4V processed timber
ISO 5832-11-1994 Ti-6Al-7Nb processed timber
Titanium inquiry pls contact tina@tmsalloy.com
