On April 28, 2024, Baoji Fairy Titanium Industry Co., Ltd. announced that Gr5 titanium plates and rods, as well as Gr2 titanium tubes and plates, would be shipped to Europe.
Two tons of 8.0X1000X3500mmTi6Al4vGr5 titanium plates were sent to Europe. Grade 5 titanium alloy, also known as TC4 titanium alloy, is also known as 6Al4V. This is the most widely used titanium metal, and the titanium alloy we usually use refers to it. It has good strength and elongation.
Titanium alloy has many excellent characteristics such as lightweight, high strength, strong heat resistance, and corrosion resistance, and is known as the "future metal". It is a new type of structural material with development prospects.
The characteristics of GR5 titanium alloy
1. Low density, high specific strength
The density of titanium metal is 4.51g/cubic centimeter, higher than aluminum but lower than steel, copper, and nickel, but its specific strength ranks first among metals.
2. Corrosion resistance performance
Titanium is a very active metal with a low equilibrium potential and a strong thermodynamic corrosion tendency in the medium. However, in reality, titanium is very stable in many media, such as oxidizing, neutral, and weakly reducing media, which are corrosion-resistant. This is because titanium and oxygen have a great affinity. In air or oxygen-containing media, a dense, strong adhesion, and inert oxide film is formed on the surface of titanium, protecting the titanium substrate from corrosion. Even due to mechanical wear, it will quickly self-heal or regenerate. This indicates that titanium is a metal with a strong tendency towards passivation. The oxide film of titanium always maintains this characteristic when the medium temperature is below 315 ℃.
3. Good low-temperature resistance performance
Low-temperature titanium alloys represented by titanium alloys TA7 (Ti-5Al-2.5Sn), TC4 (Ti-6Al-4V), and Ti-2.5Zr-1.5Mo exhibit an increase in strength with decreasing temperature, but little change in plasticity. Maintaining good ductility and toughness at low temperatures of -196-253 ℃, and avoiding metal cold brittleness, it is an ideal material for low-temperature containers, storage tanks, and other equipment.
In addition to the Gr5 titanium alloy plate, we also produce Gr1 Gr2 Gr3 Gr4 pure titanium plate and other titanium alloy plate rods and tubes (Gr7 Gr9 Gr12, etc.). For more information about titanium alloy products, please contact our sales engineer.
Contact information:
Tel: +86-0917- 3664600
Whatsapp: +8618791798690
