Home >

Knowledge

08May 2024

What is the difference between titanium socket head cap screw 10-24 UNC and 1...

10-24UNC is an American unified inch thread, the size is 10#, the thread diameter is 4.826mm, the bottom hole diameter is 3.960mm.
29Apr 2024

Are mobile phones also afraid of the cold? No electricity in winter? The reas...

Are mobile phones also "afraid of the cold"? No electricity in winter?
29Apr 2024

Add nickel foil to lithium battery and charge 70% in 11 minutes

By adding a thin layer of nickel inside the battery, a standard electric car battery can be fully charged in about 10 minutes.
17Apr 2024

Application of titanium foil in chemical filler applications

In the chemical industry, titanium foil is widely used as filler material to meet the needs of different chemical processes.
16Apr 2024

Titanium valve: the industrial star of corrosion resistance, a new choice for...

In the modern industrial field, valves are key components of fluid control, and their performance stability and corrosion resistance are crucial. Titanium valves are gradually becoming the new favorit
16Apr 2024

What are the processing methods of titanium pipe fittings?

There are many processing methods for titanium pipe fittings, the most commonly used methods are stamping, forging, roller processing, rolling, bulging, stretching, bending, and combined processing. T
12Apr 2024

Gr5(BT6/TA6V) BT3-1(TC6) BT9(TC11) and other titanium alloy rods and their he...

Titanium alloys are divided into low strength and high plasticity, medium strength and high strength, ranging from 200 (low strength) to 1300 (high strength) MPa, but generally titanium alloys can be
12Apr 2024

Does titanium metal dental implants have an impact on magnetic resonance imag...

Titanium metal dental implants, as an advanced dental restoration method, are increasingly favored by more and more patients. However, many people are concerned about whether the selection of dental i
11Apr 2024

Hot and cold rolling of titanium plates: comparison of processing characteris...

Hot rolling and cold rolling are two key methods in titanium processing, with significant differences in processing temperatures, processes, and properties of the resulting products.
11Apr 2024

How to weld copper and titanium plates?

The lattice type, melting point, thermal conductivity, linear expansion coefficient and chemical composition of copper and titanium plates are very different, so it is very difficult to weld.
11Apr 2024

Excellent characteristics of titanium alloy springs Fairytitanium

Titanium alloy springs are 60% to 70% lighter than steel springs, and the height design of titanium alloy springs can also be reduced, which can be 50% to 80% lower than that of steel springs.
03Apr 2024

How to tell if a screw is titanium? Fairytitanium

Pure titanium screws and titanium alloy screws are similar to traditional stainless steel, copper, and iron screws, but high-end series of titanium screws can reach higher levels

First 2 3 4 5 6 7 8 Last 5/38

Knowledge

What is the difference between titanium socket head cap screw 10-24 UNC and 1...

Are mobile phones also afraid of the cold? No electricity in winter? The reas...

Add nickel foil to lithium battery and charge 70% in 11 minutes

Application of titanium foil in chemical filler applications

Titanium valve: the industrial star of corrosion resistance, a new choice for...

What are the processing methods of titanium pipe fittings?

Gr5(BT6/TA6V) BT3-1(TC6) BT9(TC11) and other titanium alloy rods and their he...

Does titanium metal dental implants have an impact on magnetic resonance imag...

Hot and cold rolling of titanium plates: comparison of processing characteris...

How to weld copper and titanium plates?

Excellent characteristics of titanium alloy springs Fairytitanium

How to tell if a screw is titanium? Fairytitanium