On November 26, 2024, Baoji Fairy Titanium Industry Co., Ltd. shipped Gr4 titanium plate to customers. Gr4 titanium plate is one of the pure titanium plates with the highest tensile strength and is often used for electroplating hangers, chemical parts, etc.
The tensile strength of the Gr4 titanium plate is generally around 670 MPa, the yield strength is 550Mpa, the elongation is 22.5%, and the elongation of the Gr4 titanium plate is generally above 15%, with good plasticity. The hardness of the Gr4 titanium plate depends on the heat treatment state. The hardness after quenching is higher, usually around 200 HB, while the hardness of the solution and aging treatment states will vary.
Titanium plate electroplating hanger industry application
Titanium hangers mainly play the role of conducting, supporting, and fixing parts in electroplating production. The hangers are connected to the electrodes so that the current is more evenly transferred to the parts for electroplating. In some cases, due to the limitation of the uniform distribution of the coating due to the performance of the solution, the hangers can also be relied on to make up for it.
Titanium hangers should have sufficient mechanical strength and good electrical conductivity, and be light, small, durable, easy to load and unload parts, and have appropriate loading capacity. They are widely used in the electroplating industry, especially in high-demand occasions such as precision electronic electroplating, hardware electroplating, etc.
In addition to Gr4 titanium plates, Gr3 titanium plates (elastic plates) are also widely used in the electroplating hanger industry. Gr3 titanium plates are often available in stock of 1.0 1.2 1.5 2.0mm, and the stock size is greater than 1000x2000mm. Gr4 titanium plates are available in stock of 1000x2000mm, with common thicknesses of 1.0 1.2 1.5 2.0mm, etc. For the price of Gr3 Gr4 titanium plates, please consult our sales engineers.
Contact information:
Tel: +86-0917- 3664600
Whatsapp: +8618791798690
